Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Airbag

The following video tutorial shows the steps to remove the driver's airbag on an Audi A4 model b8 vehicle. The steps are simple and quick to perform independently. The first step, even if not shown, is to disconnect the vehicle's battery to prevent the system from activating during its removal. The second step is to insert a key or screwdriver into the right hole that can push the lever for opening the steering wheel from the inside. Once the steering wheel is open, we move on to the third step. The third step is to disconnect the connector to completely deactivate the system.

Posted on 21 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel airbag of the 2014 Audi A4
How to remove the steering wheel airbag of the 2014 Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to remove the steering wheel airbag on a 2017 Audi A4 independently. To perform this operation, it is necessary to rotate t…
How to Remove the Steering Wheel on Audi A4
How to Remove the Steering Wheel on Audi A4
Audi A4 (2007-2016 / B8) How do you remove the steering wheel from an Audi A4? Before removing the steering wheel, disconnect the battery terminals located in the engine comp…
Instructions for Removing Airbag Control Unit Audi A4 B6-B7
Instructions for Removing Airbag Control Unit Audi A4 B6-B7
Audi A4 (2004-2008 / B7) In this video tutorial, you will see the main instructions to access and remove the airbag control unit of an Audi A4 B6-B7. First, locate the contro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos