Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Dashcam in an Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Accessory kit

See other generations:
Video tutorial

To install a dashcam in an Audi Q3, choose a location that does not obstruct the driver's view, typically at the top of the windshield, behind the rearview mirror. After thoroughly cleaning the glass, attach the adhesive mount of the camera and connect the power cable.

Route the cable along the top edge of the windshield and hide it under the trim of the A-pillar and dashboard until you reach the power outlet or a dedicated connection kit for the fuse box. Once the connections are complete, turn on the ignition and check the dashcam's functionality by verifying the power, field of view, and recording quality.

Finally, secure any remaining cable lengths and make the initial settings through the camera menu or the dedicated app.


Posted on 24 July 2026 by ScegliAuto


Related tutorials

How to Install a Backup Camera on the Audi Q3
How to Install a Backup Camera on the Audi Q3
Audi Q3 (2011-2018 / 8U) In this video tutorial, you will see the main instructions for installing a backup camera for parking maneuvers on the Audi Q3. First, obtain the app…
How to Replace the Remote Battery for the Audi Q3?
How to Replace the Remote Battery for the Audi Q3?
Audi Q3 (2011-2018 / 8U) To replace the battery in the Audi Q3 remote, press the button located on the top of the remote and lift the key to free its housing. Use a small scr…
How to Replace the Timing Belt on an Audi Q3?
How to Replace the Timing Belt on an Audi Q3?
Audi Q3 (2018-2025 / F3) To replace the timing belt on the Audi Q3, raise the vehicle so that the front right wheel is off the ground. Once elevated, loosen the bolts securin…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos