Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel pump of an Audi TT

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Fuel pump

Before we can begin, we will have to get inside the cockpit of our Audi TT. So let's start by disengaging and removing the lower bench of the rear seats. By doing so, we will have reached the left top cap of our Audi TT. We then proceed by unscrewing and removing the three upper screws, and then removing the cap itself, and we will have reached the petrol pump. We will therefore have to disconnect the relative electrical plug that powers the pump. Subsequently, we will have to disconnect the relative pipes in which the fuel circulates, and then unscrew the upper ring nut that fixes the fuel pump. At this point, we can extract the pump, and we will have finished the disassembly.

Posted on 19 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the fuel pump of the Audi TT.
Disassembly of the fuel pump of the Audi TT.
Audi Tt (1998-2006 / 8N, MK 1) Today's guide will show us the steps on how to disassemble and replace the fuel pump of the Audi TT. First, we open the front door and recline the ba…
Fuel float repair on Audi TT
Fuel float repair on Audi TT
Audi Tt (2006-2014 / 8J, MK 2) To get to the fuel pump you will have to remove the rear passenger seat by lifting it from underneath and sliding it off the seat belts. You will thu…
How to disassemble and replace the fuel pressure regulator of the Audi TT 1.8T
How to disassemble and replace the fuel pressure regulator of the Audi TT 1.8T
Audi Tt (1998-2006 / 8N, MK 1) Today we will discover the instructions that will allow us to disassemble and replace the fuel pressure regulator of the Audi TT 1.8T. First, we open…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos