|
Do it yourself
| |||
| ||||
How to replace the ignition lock on an Audi A4
Model: Audi A4
B6
- Years 2000-2004
Before starting, we will have to sit in the driver's seat of our Audi A4. Let's start by disassembling and removing the airbag, simply by unscrewing the fixing screws and disconnecting the relative electrical connector. Next, we will have to remove the steering wheel, unscrewing the relative central fixing nut. Once this is done, we will have to disassemble and remove the steering column cover, then disassemble and remove the light switch control block, unscrewing the fixing screws and disconnecting the relative electrical connectors. By doing so, we will have discovered the screws that secure the ignition lock, which we will have to unscrew and remove, and then disconnect the relative electrical plugs. At this point, we will have to remove the ignition lock itself, and the disassembly will be completed. To mount the new ignition lock, we will have to follow these instructions in reverse, and we will be done.
Posted on 25 January 2022 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2000-2004 /
B6)
Below we will see the main instructions on how to disassemble and replace the starter motor of the Audi A4 1.8T. First, we raise the vehicle to acces…
Audi A4
(2000-2004 /
B6)
Today's guide will show us the procedure for disassembling and replacing the starter motor of the Audi A4 1.8T. First, we lift the car and locate the…
Audi A4
(2004-2008 /
B7)
Does our car have problems starting? Let's see the replacement of the damaged starter motor on an Audi A4. Let's unlock the front hood: let's lift it…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Steering Wheel on a Ford Fiesta
How to remove the steering wheel on a Ford Fiesta with the airbag? In this video, see how to proceed. Before removing the steering wheel, disconnect the battery power connectors. Unscrew the screws/clips located at the back of the steering wheel cover with a screwdriver, then remove the airbag from the steering wheel. Once the airbag is removed, disconnect the power cables, remove the central steering wheel anchoring pin, and disconnect the power connectors. Finally, pull the steering wheel out of its housing. To reassemble everything, proceed in reverse order. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |