Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses on the Audi TT located?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Fuse box

The Audi TT fuses are contained within the special fuse boxes which are installed on the vehicle: in this car model it is possible to identify two fuse boxes. The first is located on the side of the dashboard on the passenger side: inside it is possible to identify the fuses that deal with the operation of the fog lights, the number plate light, the central locking, etc. The second box, on the other hand, is located on the side of the engine compartment: it contains the fuses for the heated seats, lambda probes, etc.

Posted on 2 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Audi TT?
Where are the fuses located in the Audi TT?
Audi Tt (2014-2023 / MK 3, 8S) The fuse boxes of the Audi TT serve the purpose of housing the fuses that manage the operation of the devices installed in the vehicle: in this type …
Where is the fuse box of the Audi TT 8N located?
Where is the fuse box of the Audi TT 8N located?
Audi Tt (1998-2006 / 8N, MK 1) To find the box containing all the various fuses for your Audi TT 8n, you must follow the steps described in the following guide. Before starting, ma…
Where are the fuses of the Audi TT located?
Where are the fuses of the Audi TT located?
Audi Tt (2006-2014 / 8J, MK 2) All the fuses of the Audi TT are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos