Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper grille of the Audi A4.

Model: Audi A4 B8 - Years 2007-2016
Part: Grille

Below we will see the useful instructions for disassembling and replacing the front bumper grille of the Audi A4. First, we open the engine hood of our car and start unscrewing the fixing screws we find on the upper part of the bumper, then removing the plastic partition; after that, we unscrew the screws we find inside the wheel arch, unhooking and subsequently removing the front bumper, as shown in the video. At this point, we unhook the bumper grille and replace it with the new one, fixing it correctly, applying the reverse procedure!

Posted on 21 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the front bumper grille of the Audi A4
How to disassemble and replace the front bumper grille of the Audi A4
Audi A4 (2000-2004 / B6) Today's instructions will show us how to disassemble and replace the front bumper grille of the Audi A4, in simple steps. First, we open the car's ho…
How to replace the front grille in the Audi A4?
How to replace the front grille in the Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, we can see how to replace the front grille in the Audi A4, a very simple operation but it requires removing the bumper. First of al…
Removing the Audi A4 front bumper grille
Removing the Audi A4 front bumper grille
Audi A4 (2004-2008 / B7) In this video tutorial we will see the main instructions on how to remove the front bumper grille of an Audi A4 third series. First of all we open th…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos