Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump from a BMW 3 Series

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Fuel pump

See other generations:
Video tutorial

In this video, learn how to remove the fuel pump from a BMW 3 Series. First, disconnect the battery cables.

Next, remove the rear seat from the car. You will find various wiring and a metal piece with screws; this is what you need to remove. Unscrew the fastening screws of the metal cap and take it off. Wrap the entire perimeter of the sheet metal with paper or an absorbent cloth.

Then, using a screwdriver, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation hoses.

Finally, extract the fuel pump. To reassemble, follow these steps in reverse.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Removing Fuel Pump BMW 3 Series
Removing Fuel Pump BMW 3 Series
BMW Serie 3 (1998-2006 / E46) .. Today, in this video tutorial, you will learn how to remove the fuel pump from a BMW 3 Series. First, open the trunk and remove the covering on the.. …
How to Replace the Fuel Pump on a BMW 3 Series?
How to Replace the Fuel Pump on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To replace the fuel pump on a BMW 3 Series, loosen the screws that secure the rear seat cushions and completely remove them. Once removed, you can ac…
Fuel Pump Replacement for BMW 3 Series
Fuel Pump Replacement for BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, find the main instructions for removing and replacing the fuel pump on the BMW 3 Series. First, open the rear doors and start by remov…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos