Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil radiator gasket of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the gasket of the oil radiator of the BMW 3 Series. First, we open the hood of the car and start removing the engine protection cover; then we unscrew the screws of the oil radiator cover, removing the old gasket, as shown in the video.

At this point, we install the new gasket or replace the oil radiator if necessary; make sure that the oil pipes are in good condition (replace them if necessary), following the video tutorial until the end!


Posted on 19 December 2024 by ScegliAuto


Related tutorials

How to replace the oil radiator of the BMW 3 Series 328i
How to replace the oil radiator of the BMW 3 Series 328i
BMW Serie 3 (2012-2019 / F31, F30) Today we will discover the instructions that will allow us to disassemble and replace the oil radiator of the BMW 3 Series 328i. First of all, lift t…
How to Remove the Radiator from the BMW 3 Series
How to Remove the Radiator from the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, let's go over the instructions to remove and replace the engine cooling radiator on the BMW 3 Series. First, open the hood of the vehicle and …
How to Replace the Oil Filter and O-ring in a BMW 3 Series
How to Replace the Oil Filter and O-ring in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This short video illustrates the procedure for replacing the oil filter and O-ring in a BMW 3 Series. The first step is to remove the oil drain plug,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos