Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the key remote for a BMW X1

Model: BMW X1 U11 - Years: 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this video tutorial we can observe the steps to be taken in order to replace the battery of the key remote of a BMW X1 car. Take the remote in question and use the sliding button found on the right side of it, this will allow you to extract the metal key inside.

Once the key is removed, proceed to open the shell using the tip of the key on the upper edge of the remote, this will give you access to the battery compartment.

At this point, you can use the tip of a small screwdriver to pry the edge of the battery in order to remove it; finally, insert the new battery and make sure that the model used is the correct one, namely CR 2032 3V.


Posted on 29 December 2024 by ScegliAuto


Related tutorials

How to Replace the BMW X1 Remote Battery?
How to Replace the BMW X1 Remote Battery?
BMW X1 (2015-2022 / F48) To replace the battery in the BMW X1 remote, slide out the key along with the cover located on the top of the remote: you will need to press the side…
How to Replace the Key Fob Battery on a BMW X1?
How to Replace the Key Fob Battery on a BMW X1?
BMW X1 (2015-2022 / F48) To replace the key fob battery on a BMW X1, activate the switch located on the side of the fob to detach the key and the corresponding chrome cover o…
How to Replace the Key Fob Battery for the BMW X1?
How to Replace the Key Fob Battery for the BMW X1?
BMW X1 (2009-2015 / E84) To replace the battery in the BMW X1 key fob, pull the key out from the top of the device, removing the associated plastic part as well. This will al…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos