Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio of the BMW 228i 2014

Model: BMW Serie 2 F22 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

If you want to dismantle the factory radio of your 2014 BMW 228i on your own, just carefully follow the steps described in the following guide and apply them in the correct order. First of all, get into the car and make sure it is completely turned off, then proceed with the removal of the air vents located above the radio.

Once the electrical connector is disconnected, take a Torx T15 key and unscrew the screws located at the corners of the stereo. Then pull the stereo towards you and disconnect all the various electrical cables to complete the procedure.


Posted on 9 February 2025 by ScegliAuto


Related tutorials

How to disassemble and replace the battery of the BMW 2 Series 228i.
How to disassemble and replace the battery of the BMW 2 Series 228i.
BMW Serie 2 (2019-2026 / F44) The information provided in this guide will show us how to disassemble and replace the battery of the BMW Series 2 228i. First, we open the hood of t…
How to Replace the Headlight Bulb on a 2015 BMW 2 Series
How to Replace the Headlight Bulb on a 2015 BMW 2 Series
BMW Serie 2 (2014-2021 / F45) To quickly and safely replace the headlight bulb on your 2015 BMW 2 Series 228i, follow the steps outlined in this mini guide. First, turn off the ca…
Guide to Replacing the BMW 2 Series Battery
Guide to Replacing the BMW 2 Series Battery
BMW Serie 2 (2014-2021 / F45) Today, let's go through the procedure to remove and replace the battery of the BMW 2 Series in simple and quick steps. First, open the hood of your c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos