Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag and steering wheel of a BMW

Model: BMW BMW Various
Part: Airbag

Today we will explain how to remove the airbag and steering wheel on a BMW vehicle. To perform this operation, we first need to insert a long flat-head screwdriver into the steering wheel of the car to move the internal mechanism that will allow us to remove the central body. After removing the central body, you just need to disconnect it to access the central nut that locks the steering wheel. Using a Torx key, unscrew the nut and remove the steering wheel. To reassemble the steering wheel and airbag after completing the maintenance operations, we will need to follow the steps in reverse.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Disable the Passenger Airbag on a BMW
How to Manually Disable the Passenger Airbag on a BMW
BMW BMW Various If you need to temporarily disable the airbag in your BMW due to a fault but don't know how, read this guide carefully and follow the instructions. F…
BMW Chain Disassembly Guide
BMW Chain Disassembly Guide
BMW BMW Various Disassembly of the BMW timing chain, useful instructions. …
How to Remove the Engine Oil Cooler from a BMW
How to Remove the Engine Oil Cooler from a BMW
BMW BMW Various Learn how to remove the engine oil cooler from a BMW. Remove the engine cover to identify the component. To take off the cover, unscrew three screws.…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos