Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset and calibrate the pneumatic suspensions of the BMW X5

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

The instructions in this guide will show us how to reset and calibrate the pneumatic suspensions of the BMW X5. First of all, we get on board the vehicle and start connecting our diagnostic tool to the OBD port of the car, then selecting the brand and model of the car; the tool must be suitable to perform this type of operation, following the guided procedure to reset and calibrate the pneumatic suspension system, as shown in the video.

Finally, we disconnect the tool and verify the correct operation of the suspensions on the road.


Posted on 26 August 2025 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light on the BMW X5
How to Reset the Tire Pressure Light on the BMW X5
BMW X5 (2013-2018 / F15) Follow these steps to reset the Tire Pressure Monitoring System (TPMS) light on the BMW X5. Before performing the reset, ensure all four tires are at…
How to Reset the Service Light on a BMW X5
How to Reset the Service Light on a BMW X5
BMW X5 (2013-2018 / F15) The following tutorial video shows the steps to reset the maintenance light on a 2014 BMW X5. To perform the reset operation, press the button on the…
How do you reset the automatic transmission of the BMW X5?
How do you reset the automatic transmission of the BMW X5?
BMW X5 (2007-2013 / E70) In order to reset the automatic transmission of the BMW X5, you need to insert the ignition key into the ignition switch, so that it can be turned: o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos