Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the particle filter of the BMW e90?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Diesel particulate filter

The particulate filter is essential for the efficiency of our car and for environmental respect, as it aims to reduce harmful emissions from exhaust gases. Regarding the reset of the latter, in the BMW e90, we have the support of the video posted here, which explains step by step what to do: after turning on the instrument panel, you will immediately notice the warning light in question and to cancel it you will have to press the Sc button, which can be found at the end of the left steering wheel lever, hold it down for a few seconds and the job is done. There you go, all done in a few seconds.

Posted on 3 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the particulate filter of the BMW 3 Series e90?
How do you reset the particulate filter of the BMW 3 Series e90?
BMW Serie 3 (2005-2013 / E91, E90, E92) The filter in question is nothing more than the cabin filter, which, as we all know, has the task of retaining impurities from the air. When it is re…
How to Reset the Service Light on a BMW 3 Series E90?
BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the service light on a BMW 3 Series E90, which was produced between 2005 and 2013, first press and hold the small button located on the left…
How to Reset the Service Light on a BMW 3 Series E90/E91/E92
How to Reset the Service Light on a BMW 3 Series E90/E91/E92
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to reset the service light on a BMW 3 Series E90/E91/E92 without diagnostic tools: turn on the ignition, press and hold the "trip" butt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos