Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Thermostat on a BMW 320d

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Thermostat

Is the thermostat on your BMW 320d malfunctioning? No problem, today you will learn how to replace it. Once you have the new thermostat, you can start the replacement. The thermostat is located at the top of the radiator, so it is easy to locate. Remove the two screws that hold it securely to the radiator, then loosen the clamp that attaches it to the water circulation hose to the engine. After this, you can proceed to install the new thermostat. First, insert it into the water circulation hose and tighten the metal clamp securely. Now, insert it into the radiator and screw in the screws.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant Thermostat on BMW E46
How to Replace the Coolant Thermostat on BMW E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, see how to replace the coolant thermostat on a BMW E46 by following these essential steps: lift the hood and secure it with t…
How to Replace the EGR Valve Thermostat on a BMW E90
How to Replace the EGR Valve Thermostat on a BMW E90
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide shows how to replace the EGR valve thermostat on a BMW E90. First, open the hood and remove the engine cover. Next, drain the coolant and …
Where is the fuse box of the BMW 320D located?
BMW Serie 3 (2005-2013 / E91, E90, E92) Thanks to the steps described below, you will be able to locate the fuse box inside your BMW 320d in just a few minutes and safely. First of all, it …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos