Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Sunroof of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

The information provided in this guide will allow you to reset the sunroof of the BMW 3 Series. First, get in the vehicle and turn on the instrument panel; then press and hold the sunroof open button until it opens and then closes, resetting the motor as shown in the video. At this point, turn off the instrument panel and start the engine, then check the proper operation of the sunroof both when opening and closing.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the sunroof motor of the BMW Series 3.
How to reset the sunroof motor of the BMW Series 3.
BMW Serie 3 (2005-2013 / E91, E90, E92) Following these brief and simple instructions, we will see how to reset and calibrate the motor of the opening panoramic roof of the BMW Series 3. Fi…
How to Reset the Sunroof on a BMW 3 Series
How to Reset the Sunroof on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's video, we will see how to unlock the sunroof on the BMW 3 Series Touring E91. Enter the vehicle and turn the key to the first position (or…
How to Replace the Sunroof on a BMW 3 Series?
How to Replace the Sunroof on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the sunroof on a BMW 3 Series, you need to remove the headliner from inside the cabin. First, disconnect the courtesy light assembly and r…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos