Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the 4x4 System Warning Light on the BMW X5

Model: BMW X5 E70 - Years 2007-2013
Part: Checks and maintenance

In this guide, we will see the instructions that will allow us to reset the 4x4 system warning light on the BMW X5. First, get in the vehicle and start the instrument cluster and the engine; one method to reset the 4x4 light on the instrument cluster display is to fully rotate the steering wheel first to one side and then to the other, as shown in the video. At this point, turn off the instrument cluster, then start the engine; check that the 4x4 system warning light has reset (if not, proceed with a forced reset using a diagnostic tool).

Posted on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to turn off the 4x4 light in the BMW X5 e53?
How to turn off the 4x4 light in the BMW X5 e53?
BMW X5 (1999-2006 / E53) Some cars, usually intended for use on rough and rugged terrain, are equipped with four-wheel drive, the so-called 4x4 system mentioned above. This, …
How to Reset the 4x4 Light After Battery Replacement on a BMW X5?
How to Reset the 4x4 Light After Battery Replacement on a BMW X5?
BMW X5 (2013-2018 / F15) When you replace the battery in your vehicle and start the engine for the first time, you will notice a series of errors on the instrument cluster. T…
How to Reset the AdBlue Warning Light on the BMW X5?
How to Reset the AdBlue Warning Light on the BMW X5?
BMW X5 (2013-2018 / F15) If the AdBlue warning light is on in the instrument cluster of your BMW X5, it means that the fluid in the emissions system has reached the minimum l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos