Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Cabin air filter

See other generations:
Video tutorial

Frequently replacing the cabin air filter helps prevent allergies by purifying the cabin air. The filter is located in the engine compartment under the windshield. To access it, unscrew the two clips securing the cover, which can be done by hand.

Once the filter cover is removed, take out the cartridge from its housing by carefully pulling it outward to avoid dust dispersal. Obtain a pollen filter of the same model identical to the original.

Clean the housing from any dirt. Reinsert the new cartridge into the container, ensuring proper orientation, and close the cover with the clips.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
BMW Serie 3 (1998-2006 / E46) The cabin air filter is located in the engine compartment, just below the windshield, in a central position: first, remove the gasket, unscrew the sc…
Cabin Air Filter Replacement
BMW Serie 3 (1998-2006 / E46) Open the hood and ensure it is securely supported: the cabin air filter is located just below the windshield, in the center, inside its rectangular-s…
How to Replace the Cabin Air Filter in a BMW 3 Series
How to Replace the Cabin Air Filter in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you start, sit in the driver's seat of your BMW 3 Series. First, unscrew and remove the screws that secure the cabin air filter cover. Then, d…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos