Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a 2019 BMW 3 Series?

Model: BMW Serie 3 G20 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the maintenance light on the latest model of the BMW 3 Series. This procedure is valid for models produced from 2019 to the present.

Start by pressing the ignition button three times in a row, located on the center console, without touching the pedals. Then, hold down the BC button, located at the end of the lever on the left side of the steering wheel, for 15 seconds.

As soon as the maintenance screen appears at the bottom of the display, release the button and press it again. Repeat this operation once more, then release it and press it once to return to the reset options.

Here, you can choose to reset other parameters or simply turn off the ignition.


Posted on 1 October 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2012-2019 / F31, F30) How to reset the maintenance service of a BMW 3 Series? Let's see in this video how to reset the maintenance. This operation is very simple. Enter th…
BMW Serie 3 (2012-2019 / F31, F30) Let's see how to reset the service light on a BMW 3 Series F30/F31: turn on the ignition, and press the BC button on the steering column, which is us…
BMW Serie 3 (2005-2013 / E92, E91, E90) In this brief guide, you will learn how to reset the service light for routine oil change maintenance on the BMW 3 Series E90, as well as on the E91 …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Serie 3 2012-2019 - What do the red and yellow oil warning lights mean in the BMW 3 series? Read answer

How to replace the key fob battery on an Audi A3 2003?

Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key.

Watch the video!


by ScegliAuto

More videos