Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Windshield Washer Reservoir on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

Remove the windshield washer reservoir if it no longer works. Lift the vehicle on a column lift (jack) to the desired height. Next, remove the wheel (with a socket wrench or air drill) along with the respective bolts. Remove the splash shield from under the fender (right side); you will find the washer pump connected to the hoses and electrical wires. Disconnect the power clamps and the circulation hoses. Install the new part inside the fender, reconnect the hoses and electrical clamps. Test the operation. Reinstall the splash shield and mount the wheel.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Washer Pump on a BMW 3 Series
How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure to remove and replace the windshield washer pump on a BMW 3 Series in simple steps. First, open the hood …
How to Replace the Windshield Washer Reservoir on a BMW 3 Series E30
How to Replace the Windshield Washer Reservoir on a BMW 3 Series E30
BMW Serie 3 (1982-1992 / E30) Before you can start, open the hood of your BMW 3 Series E30. Begin by disconnecting the hoses and connectors attached to the windshield washer reser…
Replace the Windshield Washer Reservoir on BMW 3
Replace the Windshield Washer Reservoir on BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Do you want to replace the windshield washer reservoir on a BMW? Remove some parts inside the splash shield to access the water reservoir. Take off t…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos