Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Reservoir on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

Is the coolant reservoir on your BMW 3 Series damaged and needs replacement? Let's see how to remove it. Open the car door and pull up the hood release lever located at the bottom left of the dashboard, then lift the hood. Using a socket wrench, remove the mounting bolts, and disconnect the hoses from the reservoir. Empty the reservoir of coolant after removing it. Install the new reservoir along with the hoses and bolts, then refill the cooling system with new coolant. Close the hood after installation. Ensure the level is as indicated on the reservoir.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Expansion Tank on a BMW 3 Series?
How to Replace the Expansion Tank on a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the coolant expansion tank on this vehicle, follow these instructions. After opening the hood and lifting the car, locate the tank positio…
How to Replace the Windshield Washer Reservoir on a BMW 3 Series E30
How to Replace the Windshield Washer Reservoir on a BMW 3 Series E30
BMW Serie 3 (1982-1992 / E30) Before you can start, open the hood of your BMW 3 Series E30. Begin by disconnecting the hoses and connectors attached to the windshield washer reser…
How to Remove the Radiator Hose from a BMW 3 Series?
How to Remove the Radiator Hose from a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) Hello, today you will remove the radiator hose from your BMW 3 Series. Start by opening the front hood. Next, locate the hose, which is the pipe conn…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos