Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of BMW 5 Series E61

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

In this video, you will learn how to remove the door panel of a BMW 5 Series E61. First, open the car door and use a ratchet wrench to remove the screws located on the sides of the panel. Then, use a plastic trim tool to pry on the sides of the panel at multiple points to release it. Once detached, disconnect the electric window regulator connector and also remove the handle cable by releasing it from the bushing.

If desired, remove the old clips and replace them with new ones during reassembly!


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Removing Door Panel on BMW 5 Series
Removing Door Panel on BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Remove the door cover panel on a BMW 5 Series. Start by removing the screw covers on the panel. Use a screwdriver to remove the screws located in the…
Removing the Door Panel on BMW 5 Series
Removing the Door Panel on BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Remove the left front door of a BMW 5 Series to replace it with a new one. Disconnect the battery terminals located in the engine compartment. Using …
Removing the Rear Door Panel of the BMW 5 Series
Removing the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today, let's go over the instructions to remove and replace the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and sta…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos