Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a headlight bulb on BMW 3 Series F31

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Headlight bulb

Today we will see the instructions to be able to remove and replace the low beam headlight bulb on a BMW 3 Series F31. First of all we are going to remove the wheel from the affected side, since it is necessary to access the bulb from the wheel arch; then unscrew the screws of the latter and remove it, as shown in the video. At this point we disconnect the electrical connector of the bulbs and unscrew the fixing screws of the light, which we find just behind the light; now we unscrew the upper screws of the front bumper and remove the headlight, then extract and replace the xenon bulb!

Posted on 22 February 2021 by ScegliAuto

Video tutorial

Related tutorials

BMW 3 Series F30 - F31 headlight bulb replacement
BMW 3 Series F30 - F31 headlight bulb replacement
BMW Serie 3 (2012-2019 / F31, F30) In today's video tutorial we will see instructions on how to remove and replace the low beam and high beam headlight bulb on a BMW 3 Series F30 and F…
BMW 3 Series F30 - F31 headlight bulb replacement
BMW 3 Series F30 - F31 headlight bulb replacement
BMW Serie 3 (2012-2019 / F31, F30) In today's video we will see how to remove and replace the headlight bulb on a BMW 3 Series F30 and F31. First of all we open the bonnet and go to re…
Replacement of the front headlight bulb of the BMW 3 Series.
Replacement of the front headlight bulb of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) Let's briefly see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the BMW 3 Series. In ord…

Other guides you may be interested in

How to Remove the Rear Bumper on the Ford Fiesta

The preliminary operation is to detach the rear wheel arch from the bumper to access the screws underneath that secure the bumper (the wheel arch detaches by extracting the two plastic screws with a lever). Now unscrew all the screws around the perimeter of the bumper (you can see them by opening the rear hatch) and now you can detach the plastic from the bodywork by gently pulling it outwards: during this operation, be careful not to break the locking pins. Once you have extracted and replaced the bumper, you can reposition it and secure it by following the same operations done previously.

Watch the video!


by ScegliAuto

More videos