Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator on BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Power window motor

See other generations:
Video tutorial

Let's see how to remove the window regulator from a BMW 3 Series. Disconnect the electrical connectors before removing any parts.

Remove the trim above the door panel and unscrew the screws located underneath it. Use a plastic trim tool to remove the cover in the handle and unscrew the screw inside. Once removed, unscrew the screws located under the handle as well.

Detach the door panel and disconnect the window regulator and speaker connectors. Now that the door panel is removed, peel off the adhesive cover from the metal, and unscrew the window motor with a screwdriver.

Replace the entire window regulator assembly.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Left Windshield of a BMW 3 Series
How to Remove the Left Windshield of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Want to install the left front windshield of a BMW 3 Series? Here's how to proceed. First, use a plastic trim tool to remove the molding on the left …
How to Replace the Shift Knob on a BMW 3 Series
How to Replace the Shift Knob on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you can start, sit in the driver's seat of your BMW 3 Series. Begin by grasping the shift knob with both hands. At this point, pull firmly tow…
How to replace the side turn signal bulb of the BMW 3 Series E90
How to replace the side turn signal bulb of the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) If you own a BMW 3 Series E90 and want to find out how to replace the side indicator bulb, all you have to do is follow the steps described in our ne…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos