Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E46
- Years 1998-2006 To reset the BMW 3 Series e46 Oil Service warning light, press and hold the button on the left side of the dashboard and insert the ignition key until the ignition turns on. Now the message "__test" will appear on the display: by continuing to hold the button down, the previous message will change to "reset". When this message starts to flash, release the button and press it again. The writing will disappear, so you have to press the button again making the word "end" appear. At this point the reset of the light will have been completed correctly.
Posted on 21 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |