Do it yourself
Frequently asked questions about cars and motorcycles

How do I replace the climate control light bulbs on the BWM Series 3?

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Light bulb

To replace the air conditioning control bulb on the BMW 3 Series, you must first remove the radio, loosen the fastening bolts and disconnect the relative connectors. Once the car stereo has been removed, you will be able to see the components of the rear of the climate controls. The connector to which the bulb is connected can be pulled out of its housing and the bulb removed from it. The new bulb can then be connected to the connector and inserted into its housing. Finally, it will be possible to mount the car radio again.

Posted on 11 October 2021 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) The battery replacement of the BWM Series 3 remote control is carried out by pressing the button located in the upper part of the device, so that the…
BMW Serie 3 (1998-2006 / E46) Remove the climate control buttons from the center console, just below the radio. This is extremely simple since they are secured with side clips. Us…
BMW Serie 3 (1998-2006 / E46) To be able to reset the BWM Serie 3 ECU, you need to access the passenger compartment, so that you connect a diagnostic tool to the vehicle's OBD por…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - Which Xenon lamp does the BMW 3 series E91 mount? Read answer
    • Serie 3 2005-2013 - How to replace the sidelight bulbs in the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - What sidelights does the BMW 3 Series mount? Read answer

How to Remove the Original Radio from a Renault Trafic

How to remove the original radio from a Renault Trafic? Follow this video closely to perform the removal: use the original or aftermarket metal keys to detach the stereo, insert the keys into the holes on the plastic cover of the stereo, pull the stereo towards you as shown in the video, and extract the radio while being careful of the various wiring (disconnect the power connectors and the antenna cable). Finally, reinstall the original radio or a generic brand with the appropriate adapter for the input and connector.

Watch the video!


by ScegliAuto

More videos