Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Low Brake Fluid Warning Light on a BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Warning light – error code

After replenishing the brake fluid in the BMW X1, you can manually reset the warning light. To do this, turn on the ignition and press the small button to the left of the speedometer until the maintenance menu appears. Use the two arrows on the left steering wheel stalk to scroll and find the option you need, in this case, the brake system, represented by an icon similar to the handbrake light, but with fluid inside. Press and hold the BC button on the same stalk until the reset confirmation appears on the display.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Fluid Warning Light on a BMW X1
How to Reset the Brake Fluid Warning Light on a BMW X1
BMW X1 (2015-2022 / F48) In this video, you will learn how to reset the brake fluid warning light on a BMW X1 F48 after replacing the fluid. Using the mouse on the center con…
Where is the Brake Fluid Reservoir Located on a BMW X1?
Where is the Brake Fluid Reservoir Located on a BMW X1?
BMW X1 (2015-2022 / F48) In this video, we will see where the brake fluid reservoir is located on a BMW X1. Unfortunately, it is in a very awkward position. You need to open …
How to Reset the Brake Wear Light on the BMW X1?
How to Reset the Brake Wear Light on the BMW X1?
BMW X1 (2015-2022 / F48) To reset the brake wear light on the BMW X1, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is on, press and hol…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos