Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Installing a Xenon Kit

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Accessory kit

This guide shows how to install a xenon kit without causing damage. Ensure that the bulbs do not break or scratch during installation. Do not touch the bulbs with your fingers and do not cut any wires. For installation, remove the front end of the car and the front grille by unscrewing the screws at the edges near the headlight. This allows you to detach the trim easily. You then have access to the headlight, and after unfastening all the securing screws, you can easily remove it. You can then work on the headlight by removing the bulb holder cap and the halogen bulb. Insert the new xenon bulb by securing the adapter easily; just twist it a quarter turn until you hear a "clack."

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing a Xenon Headlight
Installing a Xenon Headlight
BMW Serie 5 (1995-2003 / E39) Installing xenon headlights is a relatively simple and quick job, although it requires a certain degree of patience and skill. To start, remove the h…
Replacement of the front headlight bulb of the BMW 5 Series.
Replacement of the front headlight bulb of the BMW 5 Series.
BMW Serie 5 (2010-2017 / F10, F11) Today we will see the step-by-step instructions that will allow us to disassemble and replace the xenon headlight bulb of the BMW 5 Series. In order …
Installing AUX IN Adapter for iPod
Installing AUX IN Adapter for iPod
BMW Serie 5 (1995-2003 / E39) Remove the volume control knob and locate the hole to insert the key to release the retaining spring by turning it: once released, disconnect the dis…

Other guides you may be interested in

How to Replace the Rear Indicator Bulb on an Audi A3

Position the car on a ramp or flat surface and immobilise it. Now, open the boot lid and, inside, corresponding to the rear light where you want to replace the indicator bulb, remove the small plastic cover using a screwdriver. Inside the hole, you will find a bolt (to be removed with a flat screwdriver); once this is undone, you can remove the entire rear light assembly. After this, proceed to remove the part inside the light assembly by unscrewing the 2 small bolts, as shown in the images. In the part you just removed, all the bulbs of the light are mounted. To replace them, simply remove them from their sockets and fit the new ones. To reassemble the entire unit, repeat all the steps shown in the images in reverse order.

Watch the video!


by ScegliAuto

More videos