Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tips for Removing the Starter Motor

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Starter motor

This video provides some tips regarding the procedure for removing the starter motor from a BMW 5 Series. It particularly highlights the suitable tools for the job: it focuses on an E12 socket that is especially useful for removing the three bolts that secure the starter motor. The same bolts are shown, and their location on the starter support is explained. The E12 socket should be mounted on a ratchet wrench with an extension to allow easier access to the mounting bolts.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Tips for Removing the Expansion Tank
Tips for Removing the Expansion Tank
BMW Serie 5 (1995-2003 / E39) This tutorial provides some tips explaining the procedure to remove and replace the expansion tank from a BMW 5 Series. First, remove the screw that …
Cleaning Starter Switch Contacts
Cleaning Starter Switch Contacts
BMW Serie 5 (1995-2003 / E39) If the starter motor does not activate when turning the ignition key, there may be a contact issue in the starter switch. You can try cleaning the co…
Tips for Using the Air Conditioning
Tips for Using the Air Conditioning
BMW Serie 5 (1995-2003 / E39) This brief tutorial provides tips for the proper and effective use of the air conditioning system in a BMW 5 Series. First, it is recommended to use …

How to Replace the Rear Indicator Bulb on an Audi A3

Position the car on a ramp or flat surface and immobilise it. Now, open the boot lid and, inside, corresponding to the rear light where you want to replace the indicator bulb, remove the small plastic cover using a screwdriver. Inside the hole, you will find a bolt (to be removed with a flat screwdriver); once this is undone, you can remove the entire rear light assembly. After this, proceed to remove the part inside the light assembly by unscrewing the 2 small bolts, as shown in the images. In the part you just removed, all the bulbs of the light are mounted. To replace them, simply remove them from their sockets and fit the new ones. To reassemble the entire unit, repeat all the steps shown in the images in reverse order.

Watch the video!


by ScegliAuto

More videos