Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Cylinder Head Revision Instructions

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Engine

Before installing the cylinder head, check the flatness of the surface using a straightedge and a feeler gauge; proceed to replace the valve guide seals by releasing the return springs with the appropriate arch clamp, removing the valve and the old seal to insert the new one generously lubricated; apply new gaskets to the water inlet and the exhaust manifold; inspect the cylinder block surface, re-tap the threads of the cylinder head mounting holes, taking care not to let chips fall into the cylinders; place the new gasket and the cylinder head using a new set of studs to secure it (cross-locking pattern with a torque wrench); insert the new valve lifters generously lubricated and the new camshaft; align the timing marks and install the timing gears and the timing chain; complete the assembly with the valve cover and the intake manifold, also replacing the gaskets in this case.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cylinder Head Fastening Bolts
Replacing Cylinder Head Fastening Bolts
BMW Serie 3 (1998-2006 / E46) Before repositioning the new cylinder head gasket, clean the threads of the cylinder head fastening holes using the appropriate tap, taking care not …
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
BMW Serie 3 (1998-2006 / E46) After machining the cylinder head, check the flatness of the surface using a straightedge and a feeler gauge for valves; repeat the same check on the…
Head Gasket Installation
Head Gasket Installation
BMW Serie 3 (1990-2001 / E36) If the cylinder head has been removed to replace the head gasket, it may be necessary to re-tap the threaded holes in the cylinder block. Be careful …

Other guides you may be interested in

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos