Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the cabin filter in a BMW "Serie 3" 328 I

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Cabin air filter
Operation: How to replace the cabin filter in a BMW "Serie 3" 328 I

In this video tutorial we can see how it is possible to replace the cabin filter in a BMW "Serie 3" 328 I: the first thing to do is to buy a new pollen filter, next step we have to get in the car, turn off the car and apply the handbrake. The pollen filter on this car can be found under the glove compartment, so we must remove using a screwdriver, the fasteners of the cover that is under the compartment, once we have removed the cover under the compartment, we must disconnect the cable and then we have to unscrew the screw of the filter cover; remove the old filter element and place the new filter in its seat following the indications of the arrows on the filter itself.


Posted on 7 September 2022 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the cabin filter of the BMW E90? Read Answer
    • Serie 3 1990-2001 - How much does the BMW E46 cabin air filter cost? Read Answer
    • Serie 3 2005-2013 - Where is the cabin filter of the BMW 320 F30-F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos