Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the windshield washer pump located in the BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Pump

In this video, you can see where the windshield washer pump is located in the BMW 3 Series F30 and how to proceed if you need to replace it. As shown, it is mounted to the corresponding reservoir, located in the lower area of the right front wheel well. To access it and then remove it, first lift that side of the car, remove the wheel, and detach the protective panel by unfastening the various indicated plastic rivets. Once this is done, you can unscrew the bolts securing the reservoir, remove it, and take out the pump held in place.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Below are the instructions needed to disassemble and replace the windshield washer pump on the BMW 3 Series. First, raise the vehicle and begin by re…
How to Replace the Windshield Washer Pump on a BMW 3 Series
How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure to remove and replace the windshield washer pump on a BMW 3 Series in simple steps. First, open the hood …
Removing Windshield Washer Sprayers BMW 3 Series
Removing Windshield Washer Sprayers BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to remove the windshield washer sprayers from a BMW 3 Series E90. First, open and lift the hood of the car…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos