Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a BMW 1 Series 116d 5-Door

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

See other generations:
Video tutorial

In this video, we will show you how to replace the rear brake pads on a BMW 1 Series 116d 5-door. Start by removing the rear wheels as shown in the video.

After that, disconnect the line that supplies brake fluid to the discs. At this point, begin to remove the bracket that holds the pads against the disc.

Once this is done, slide out the pads and clean the two brackets where the pads rest. Lubricate them to make it easier to fit the new ones.

Grease the edges of the new pads and place them in their housing. Finally, reassemble everything as shown in the video.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads of the BMW 1 Series?
How to Replace the Rear Brake Pads of the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) To replace the rear brake pads of the BMW 1 Series, lift the car with a jack or ramp so that the corresponding wheel is not in contact with the groun…
How to replace the front brake pads on a BMW 1 Series
How to replace the front brake pads on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To replace the front brake pads on a BMW 1 Series, park the vehicle on a flat surface, loosen the wheel bolts, and safely lift the car. Remove the wh…
Replacing the Front Brake Pads on the BMW 1 Series E87
Replacing the Front Brake Pads on the BMW 1 Series E87
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To replace the front brake pads on the BMW 1 Series, open the bonnet of the engine compartment, remove the panel on the driver's side, and open the b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos