Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Emblem on the Hood

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Body

Sometimes, exposing your car to weather events and/or frequent high-pressure washes can cause some emblems to become dull or deteriorate. In this video, for example, you will replace the emblem on the hood. As you can see from the images, you need to gently pry around the emblem bit by bit. Carefully, without applying too much force to avoid damaging the body, remove the emblem. Note that the two plastic clips may remain in the mounting holes and can also be provided with the new replacement. Clean the surface around the clips thoroughly. Position the new emblem and push it all the way down. Now, just remove the protective film. Car model: BMW E65 745 Year: 2003
Required tools: an old plastic card, a plastic tool to remove the panel clips, a cleaning product, and a cloth.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW Serie 7 (1994-2001 / MK 3, E38) Open the hood and ensure it is securely supported. The cabin air filter is located just under the hood, at the rear, inside a small access panel. Rem…
Instructions for Removing the Front Fender
Instructions for Removing the Front Fender
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38) To remove the front fender, first remove the hood (the hood hinge support bracket is located on the edge of the fender) and the bumper (one of the mo…
Installing Hood Support Struts
Installing Hood Support Struts
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) The struts that support the hood and also hold it during the closing phase are actually gas springs that tend to lose their capacity to support weigh…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos