Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the Throttle Valve of the Intake Manifold

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Engine

At the center of the intake manifold is a throttle valve mounted on a rectangular plastic box-shaped support; it is quite common for the throttle control mechanism to break, but it is also easy to find a replacement; disassembling this valve is very simple as you only need to remove the two mounting bolts and disconnect the actuator power connector; once the bolts are removed, pull the throttle out of its seat, taking care not to damage the sealing gasket.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Intake Air Temperature Sensor
How to Replace the Intake Air Temperature Sensor
BMW Serie 3 (2005-2013 / E92, E90, E91) If the check engine light comes on and the code "P0111" appears on the diagnostic tool display, you need to replace the air temperature sensor on the…
Disassembly and Cleaning of the Intake Manifold
Disassembly and Cleaning of the Intake Manifold
BMW Serie 3 (1998-2006 / E46) This operation requires precision and attention to detail since there are many components to remove before accessing the intake manifold. Start by re…
Intake Manifold Gasket
Intake Manifold Gasket
BMW Serie 3 (1990-2001 / E36) The intake manifold of the car is a device designed to evacuate exhaust gases from the cylinders. Working at high temperatures, the gasket of this ma…

Other guides you may be interested in

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos