Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the cabin filter on a 2007 BMW 320

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Cabin air filter
Operation: How to replace the cabin filter on a 2007 BMW 320

Replacing the BMW 3 series cabin filter has never been easier with the help of this new video tutorial, in fact we will explain what to do. First we open the hood and unscrew the six fasteners of the cabin filter cover, to perform this operation we need a socket wrench No. 8. Now we remove the lid and disconnect the clips that fix the filter; we remove the filter from the housing and insert the new filter. We fix the clips and mount the lid. With key no. 8 tighten the screws and close the hood. As a last step, let's start our car and turn on the air conditioning, to make sure that the component is working properly.


Posted on 7 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the cabin filter of the BMW E90? Read Answer
    • Serie 3 1990-2001 - How much does the BMW E46 cabin air filter cost? Read Answer
    • Serie 3 2005-2013 - Where is the cabin filter of the BMW 320 F30-F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos