Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a BMW 3 Series E36?

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Pump

See other generations:
Video tutorial

Before starting, gather the necessary tools using the list shown in the first 20 seconds of this video. Open the hood and remove the cap from the coolant reservoir.

Next, remove the thermostat, the serpentine belt, and finally, the water pump. Follow the step-by-step instructions in the video to locate all components.

Install the new pump, ensuring to properly tighten its mounting bolt, and then reinstall both the serpentine belt and the thermostat. Finally, fill the reservoir and tighten the cap.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Remove the Water Pump on a BMW 3 Series
How to Remove the Water Pump on a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Let's see how to remove the water pump on a BMW 3 Series. Lift the car on a column lift and secure it, then use a screwdriver to unscrew the locking …
Instructions for Replacing the Water Pump
BMW Serie 3 (1990-2001 / E36) The water pump is located at the front of the engine: open the hood and ensure it is securely supported. Remove the plastic engine cover and the smal…
How to replace the water pump of the BMW Series 3 320D
How to replace the water pump of the BMW Series 3 320D
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, we will see the main instructions on how to disassemble and replace the water pump of the BMW Series 3 320D. First, let's open the car…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos