Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Engine Mount Efficiency

Model: BMW X3 E83, MK 1 - Years 2003-2010
Part: Checks and maintenance

If you hear a noise coming from the lower part of the engine during acceleration and deceleration, a sort of thud that you can feel right under the pedal area, it is likely that there is a failure of the engine mounts, which are metal and rubber components designed to dampen vibrations and connect the engine to the cradle fixed to the vehicle's frame; due to the rubber failure, the mount will no longer be able to dampen vibrations, and the metal-to-metal contact will result in this annoying noise; however, replacement is quite simple and inexpensive.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Mount Replacement Instructions
Engine Mount Replacement Instructions
BMW X3 (2003-2010 / E83, MK 1) Engine mount failure is a common issue on many BMW models, but fortunately, both the aftermarket replacement parts and the installation are easy to h…
Fog Light Replacement for BMW X1
Fog Light Replacement for BMW X1
BMW X3 (2010-2017 / F25, MK 2) Replacing the fog light is essential in case of wear or cloudiness, to restore the vehicle's lighting efficiency. As shown in the video, check the fo…
How to top up the coolant in a BMW X3?
How to top up the coolant in a BMW X3?
BMW X3 (2010-2017 / F25, MK 2) To top up the coolant of your BMW X3, follow these steps. Make sure the engine is cool before starting. Open the hood and locate the coolant tank. Ch…

Other guides you may be interested in

    Frequently Asked Questions

    • X3 2010-2017 - How much does it cost to maintain the BMW X3 xdrive 2.0 d f25 annually? Read answer

How to Remove the Front Headlight of a Mercedes S-Class

Want to remove the front headlight of a Mercedes S-Class? Let’s see how to proceed with the disassembly in the instructional video. Open the hood by pulling the hood release lever and secure it. Remove the retaining pins on the headlight bar using a socket wrench or battery-powered screwdriver. At this point, you will find additional pins on the lower side of the headlight; unscrew them from the metal brackets. Disconnect the bulb holders from the headlight and remove the headlight from the vehicle body. Install the new headlight with new bulbs if damaged (always use the correct type and size) and insert the headlight into its housing. Finally, tighten the pins on the headlight and test the proper functioning of the lights.

Watch the video!


by ScegliAuto

More videos