Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of a BMW 5 Series F10.

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Cabin air filter

If you want to discover how to replace the cabin air filter of your BMW 5 Series F10, all you have to do is carefully read the following mini guide. Thanks to the instructions provided, in fact, you will be able to complete the entire maintenance operation in just a few minutes and with total autonomy. First, reach the passenger side and locate the panel located below the glove compartment. Unscrew the two side screws with a special key and remove the entire panel. At this point, locate the box containing the filter, remove the cover and proceed with the replacement.

Posted on 16 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the BMW 5 Series F10 air filter
How to replace the BMW 5 Series F10 air filter
BMW Serie 5 (2010-2017 / F11, F10) Below we will find out together how to correctly replace the air filter inside your BMW 5 Series F10 (year 2010-2017). The following guide is also pe…
How to replace the cabin air filter on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Before we can start, we will have to open the front passenger door of our BMW 5 Series. Let's start by disassembling and removing the covers that are…
Replacement cabin air filter BMW 5 Series 520d
Replacement cabin air filter BMW 5 Series 520d
BMW Serie 5 (2010-2017 / F11, F10) In this video tutorial we will see how to remove and replace the cabin air filter of a BMW 5 Series 520d. First we get inside the car and remove the …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos