|
Do it yourself
| |||
| ||||
How to replace the valve on BMW 5 Series.
Model: BMW Serie 5
E39
- Years 1995-2003
In this video tutorial, we can see how it is possible to replace the valve on a BMW 5 series, following a few simple steps: lift the engine hood and secure it with a special rod. The valve is located on the left side of the engine compartment. To remove this valve, we must remove the electrical connection by simply pressing on the clip. Remove the two screws with a 40 torx wrench. Now all we have to do is pull the valve away from its seat. Once the old valve has been removed, we must replace it with the new one and reassemble the parts by proceeding in reverse.
Posted on 28 May 2023 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 5
(2010-2017 /
F11, F10)
Let's see in this short video the main instructions that will allow us to disassemble and replace the EGR valve of the BMW 5 Series. First of all, op…
BMW Serie 5
(2010-2017 /
F11, F10)
In order to remove the EGR valve of the BMW 5 Series, you need to open the hood so that you can access the components located inside the engine compa…
BMW Serie 5
(2003-2010 /
E61, E60)
In order to replace the EGR valve on the BMW 5 Series, you need to open the bonnet, so that you can access the components inside the engine compartme…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
