Do it yourself
Frequently asked questions about cars and motorcycles

Radiator Mount Removal

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Radiator

See other generations:
Video tutorial

The radiator mounts are actually rubber washers that dampen vibrations and support the radiator itself. To remove and replace these mounts, you need to take off several other components from the front of the vehicle, such as the headlights and the bumper, to create enough working space to lower the radiator sufficiently to extract the mounts.

Start by removing everything that interferes with the radiator, including the hood release cable and the related latches. Once the radiator is free, you can remove the mounts.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) The failure of the rubber engine mounts is quite evident as the engine tends to move excessively at idle and makes noise, especially during starting …
BMW Serie 3 (2005-2013 / E92, E90, E91) Lift the car on one or more jack stands if you don't have a lift. Remove the two Torx T20 screws located above and to the side of the front bumper. A…
BMW Serie 3 (1998-2006 / E46) To remove the radiator fan, you first need the proper tools: a 32mm wrench and a tool to lock the water pump pulley. It is also possible to rent thes…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos