Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Car Radio and Installation of GPS Navigation

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car stereo

See other generations:
Video tutorial

Start by gently removing the plastic trim on the sides of the tunnel using a plastic tool to avoid damaging the bodywork. Remove the screws from the frame, then the screws from the radio console, and gently lift the CD player to allow for connector removal.

Also remove the car radio in the same manner. Remove the glove compartment by pushing it back to release it from its slot.

Remove the screws securing the air vent and move it to remove the metal support of the car radio. Install the microphone near the rearview mirror and run the cable through the wiring of the dome light to the radio compartment.

Before reinstalling the navigation system, it is essential to install the satellite antenna in the right corner of the windshield and wire the cable to the radio compartment. Reconnect all cables to the navigation system using the included extension adapters and place the navigation unit in the radio compartment, securing it with screws.

Reassemble the frame, air vent, and trim. Turn on the navigation system for a functionality test.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Removing the Car Radio and Various Dashboard Parts, and Installing the GPS Navigator
Removing the Car Radio and Various Dashboard Parts, and Installing the GPS Navigator
BMW Serie 3 (1998-2006 / E46) Using a medium-sized flathead screwdriver, pry off the dashboard trim. Unscrew the fastening screw of the side air duct and remove it. Take off the…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
BMW Serie 3 (1998-2006 / E46) To remove the navigation display, you first need to have the proper extraction keys; start by removing the trim pieces from the center dashboard area…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
BMW Serie 3 (1998-2006 / E46) First, consider that some components of the car radio and navigation system (CD changer, DVD map reader) are located in the trunk, on the side: if yo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos