Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clear the Lens of the Headlights

Model: BMW Serie 7 E68, E65, MK 4, E67, E66 - Years 2001-2008
Part: Headlight

First, protect the surrounding bodywork of the headlight with masking tape. Take fine waterproof sandpaper. Soak it in a bowl of detergent and start sanding the headlight lens until the yellow haze is no longer visible. At this point, take finer sandpaper and continue sanding the headlight. Once this operation is complete, dry the headlight and use cleaning products. First, apply product #1 to the headlight, then use a drill with the appropriate attachment to clean the headlight. After that, apply the product to make the lens shine and repeat the cleaning operation with the drill. This maintenance operation was performed on a BMW 7 Series.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Window Regulator Replacement
Window Regulator Replacement
BMW Serie 7 (1994-2001 / MK 3, E38) To replace the rear window regulator, first remove the door trim panel and the soundproofing material (be careful when peeling off the adhesive to av…
Instructions for Replacing the Front Headlight
Instructions for Replacing the Front Headlight
BMW Serie 7 (1986-1994 / MK 2, E32, E38, MK 3) If the headlight is broken, before proceeding with disassembly, remove any glass remnants. Then, unscrew the mounting screws located at the top of th…
Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
BMW Serie 7 (1986-1994 / MK 2, E32, E38, MK 3) To easily remove the front bumper, it is certainly helpful to lift the vehicle on suitable jack stands (or a lift), remove the front wheels and then …

Other guides you may be interested in

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos