Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E90, E92, E91
- Years 2005-2013 In order to replace the water pump of the BMW 3 Series, you need to loosen the screws that secure the cover on the top of the engine block. Once this, along with the air filter box, has been removed, you will be able to access the front part of the engine block. The water pump will be located at this point since the car has a longitudinal engine. By loosening the screws that hold it to the supports and disconnecting the respective pipes, the old water pump can be removed and replaced with a new spare part. After installation, you can reassemble the engine cover and the air filter box.
Posted on 16 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |