Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the exterior mirror of the BMW 3 series car

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Outside rearview mirror
Operation: How to remove the exterior mirror of the BMW 3 series car

Do you want to remove the mirror of your BMW and don't know how to do it? Don't worry, let's see the right steps together in this video. Before starting the disassembly work, let's disconnect the battery terminals. If you can't find it, don't be afraid, in your BMW it is located in the rear hood and not in the front like in most cars. Using a torx 20 insert screwdriver we go to unscrew the inside door handle, being careful not to scratch it. Remove the large clip with a plastic spatula, unscrew the screw placed in the slot, once removed, also unscrew the one of the interior door opening lever. We detach the door panel, unhook the clamps of the window lifters, of the speakers. Let's not lose all the interlocking clips placed behind the plastic panel that we removed earlier. We disconnect the terminals of the mirror power supply, remove the plastic coating and unscrew the pins with the screwdriver, we extract the mirror from the outside by sliding the power supply wire.


Posted on 26 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - How do you replace the glass of the rearview mirror of the BMW 3 Series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos