Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Rotors on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake rotors

See other generations:
Video tutorial

To replace the brake rotors on a BMW 3 Series, follow these steps: 1) Lift the vehicle. 2) Remove the wheel. 3) Remove the bolts securing the brake caliper to the hub. 4) Remove the metal clip on the front side of the brake caliper. 5) Using a screwdriver, compress the internal piston and remove the brake caliper. 6) Secure the caliper with a bungee cord to avoid damaging the brake line and remove the old brake pads inside. 7) Locate the bolts of the bracket holding the brake caliper and remove it. 8) Remove the rotor using a hammer and a punch. 9) Reinstall everything in reverse order, making sure to clean the surface of the rotor before installing it and compress the brake caliper pistons.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Reset Brake Light on BMW 3 Series
Reset Brake Light on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Reset the brake light on a BMW 3 Series? Let's see how to reset the light. Turn on the ignition and check that the brake light is illuminated. Turn o…
Replacing Brake Rotors on BMW 3 Series
Replacing Brake Rotors on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Are the brake pads worn out? Do you want to replace the rotor? Let's see how to disassemble the parts. Lift the car on a column lift, then remove the…
How to Replace the Third Brake Light Bulbs on the BMW 3 Series
How to Replace the Third Brake Light Bulbs on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these instructions to remove and replace the bulbs and housing of the third brake light on the BMW 3 Series. First, open the trunk or access t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos