Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses located in the BMW 3 Series?

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Fuse box

Each of the fuse boxes of the BMW 3 Series is responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in this type of vehicle, it will be possible to identify a single box for containing the fuses. This will be located in the upper right part of the engine compartment, immediately under the windshield on the driver's side: here it will be possible to identify the fuses that regulate the operation of the windshield wipers, the fuel pump, the air conditioning, etc. Each of the fuses present here can be replaced with a new one of the same amperage.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carp…
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuses in the BMW 3 Series are divided among the designated fuse boxes in the vehicle: this model has three boxes containing fuses. The first is l…
BMW Serie 3 (2012-2019 / F30, F31) Inside the BMW 3 Series, the fuses are housed in specific fuse boxes installed in the vehicle: this type of car has three. The first is located at th…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos