Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front door handle of the BMW 3 Series G20.

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Car door

To replace the external handle of the front door of the BMW 3 series, open the door and remove the rubber cap on the inner frame. Using a Torx 15 screwdriver, unscrew the screw inside. This will allow us to detach the rear part of the handle, remove the front part, disconnect the two electrical connectors, and permanently remove the handle. Using a 4mm hex key, working diagonally in the hole of the frame, unscrew the handle plate and remove it. Install the new plate and secure it with the screw, connect the connectors to the new handle, insert it into the front hole and then the rear one, secure it with the screw, and replace the rubber cap.

Posted on 21 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the BMW 3 Series G20 located?
Where is the fuse box of the BMW 3 Series G20 located?
BMW Serie 3 (2019-2026 / G20) In the following guide aimed at all of you who own a BMW 3 Series G20, we will explain how you can access the box containing all the various fuses of…
How to Replace the Air Filter on a BMW G20
How to Replace the Air Filter on a BMW G20
BMW Serie 3 (2019-2026 / G20) If you own a BMW G20 (2019-2022) and want to learn the steps to properly replace the engine air filter, just read this guide carefully and follow the…
How to Remove the Door Panel of the BMW 3 Series
How to Remove the Door Panel of the BMW 3 Series
BMW Serie 3 (2019-2026 / G20) Today, you will learn in this brief and simple guide how to remove and replace the front door panel of the BMW 3 Series. First, open the front door a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos