Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Key for the Cadillac CTS

Model: Cadillac Cts MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

If you need to program a second key for this vehicle model, refer to the instructions provided in this description and the video. First, extract the emergency key and insert it into the driver’s door lock, simulating the opening five consecutive times.

Then, access the cabin and take the new key to be programmed and insert it into the slot. Next, insert the emergency key of the second remote into the ignition lock; this way, the new key will be programmed and can be used.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2009 Cadillac CTS
How to Reset the Oil Light on a 2009 Cadillac CTS
Cadillac Cts (2008-2014 / MK 2) In this new mini guide dedicated to your 2009 Cadillac CTS (second generation), you will find all the steps to manually reset the engine oil light. F…
How to Replace the Lambda Sensor on a Cadillac CTS?
How to Replace the Lambda Sensor on a Cadillac CTS?
Cadillac Cts (2008-2014 / MK 2) The lambda sensor on a Cadillac CTS is located underneath the car, between the exhaust outlet and the fuel tank. Therefore, lift the vehicle to acces…
How to Reset the Tire Pressure Light on a Cadillac CTS
How to Reset the Tire Pressure Light on a Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) This guide provides instructions on how to reset the tire pressure light on a Cadillac CTS. Before resetting the TPMS sensors, ensure all four tires …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos