Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exterior Rearview Mirror on the Cadillac CTS

Model: Cadillac Cts MK 1 - Years 2002-2007
Part: Side mirror

Today, you will see in this video tutorial the steps to remove and replace the exterior rearview mirror on the Cadillac CTS. First, open the front door and start removing the screws securing the door panel, taking off the various plastic covers; then disconnect the handle cable and the electrical connector for the switch, as shown in the video. At this point, remove the screws securing the mirror, pulling it out from the outside and replacing it with the new one; secure it properly with the screws and reassemble the door panel!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on a Cadillac CTS
How to Reset the Tire Pressure Light on a Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) This guide provides instructions on how to reset the tire pressure light on a Cadillac CTS. Before resetting the TPMS sensors, ensure all four tires …
How to Replace the Lambda Sensor on a Cadillac CTS?
How to Replace the Lambda Sensor on a Cadillac CTS?
Cadillac Cts (2008-2014 / MK 2) The lambda sensor on a Cadillac CTS is located underneath the car, between the exhaust outlet and the fuel tank. Therefore, lift the vehicle to acces…
How to Replace the Front Bulb on a Cadillac CTS
How to Replace the Front Bulb on a Cadillac CTS
Cadillac Cts (2002-2007 / MK 1) In today's video, you will see how to replace the front headlights on a 2003 Cadillac CTS. Remove the rubber caps located on the bumper, both on the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos