Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Cadillac XT5

Model: Cadillac Xt5 MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car door

Video tutorial

If you intend to remove the inner door panel of this vehicle, you will find the necessary information and instructions in the description below and in the tutorial video. The first step is to remove the plastic trim located next to the handle; underneath it, you will find screws that need to be removed.

Next, remove the plastic panel located under the opening handle and unscrew the screws found there as well. At this point, use a plastic pry tool to gently detach all the clips around the panel after removing the two screws located at the bottom of the door.

This way, you can lift the panel out and be careful to disconnect the electrical connectors located behind it.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Cadillac XT5
How to Remove the Front Door Panel of the Cadillac XT5
Cadillac Xt5 (2017-2024 / MK 1) Let's go through the necessary guide on how to remove and replace the front door panel of the Cadillac XT5 in simple and quick steps. First, open the…
Where to Find the Fuse Box of the Cadillac XT5
Where to Find the Fuse Box of the Cadillac XT5
Cadillac Xt5 (2017-2024 / MK 1) If you are looking for the fuse box of your Cadillac XT5 and have not been able to find it, don't worry because below you will find all the useful in…
How to Remove the Rear Tail Light of the Cadillac XT5
How to Remove the Rear Tail Light of the Cadillac XT5
Cadillac Xt5 (2017-2024 / MK 1) In today's tutorial video, you will learn how to remove and replace the rear tail light of the Cadillac XT5, following the instructions below. First,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos